SUBURBAN SW6DRA Hot Water System - 20.3L Capacity - 12V/LPG.
20.3 litre - 12volt - Gas with 12volt ignition
Faster Recovery
Fast recovery means more hot water and fewer cool water cycles. Suburban uses a copolymer insulation jacket specially moulded to fit the tank which does a better job of retaining heat than some other models.
More Convenience
All Suburban water heaters are designed for easy installation, operation and maintenance. The limit switch, reset button and on/off electric element rocker switch are conveniently located in a housing behind the removable outer door. The electric heat element and combination drain plug/anode rod are also located there.
Longer Life
Heated water attacks all metals, but not porcelain. That’s why Suburban uses a porcelain-lined, steel water heater tank with an anode rod to “absorb” the electrolytic action - just like your water heater at home.
Regulation Compliant
Suburban Water Heaters carry the following approvals:
WaterMark Certification
Australia and New Zealand
Gas Safety Certification Regulatory Compliance Mark (RCM)
- Capacity: 20.3 Liters
- Max working pressure: 700Kpa/150Kpa
- Hourly gas consumption: 8.7mj/hour
- Test point pressure: 2.63Kpa
- Jet orifice size: 0.84mm
- Type of heating medium: Universal LPG/ 240Volt
- Recovery: 40Lt/hr 45°C rise
- Size of inlet 3/8”SAE
-
- Cold water inlet is 1/2 inch female BSP.
- Hot water outlet is 1/2 inch female BSP.
- For auto gas ignitor: 12Volt DC
WIDTH: 320mm
HEIGHT: 320mm
DEPTH: 500mm
950-00026-W
HWS