The Hook Collar has been designed to easily attach to the Safety Spring, and the Hook Collar can be used as a locking nut when the ground is too hard. Screw the peg in as far as possible and wind the hook collar to ground level to secure.

Incorporated into the bottom of the Hook Collar is a 19mm socket shape, which can be used as a hand tool if required.

Hook Collar

Ground Dog Screw in Pegs™ use Hook Collars.

Ground Dog Screw in Pegs™ use the Hook Collar to attach the Tie Down Strap to the Safety Spring. The design of the Hook Collar makes it easy to attach to the Safety Spring.

The Hook Collars are bright in colour to draw attention to avoid stubbing of toes.

The hex cut out in the Hook Collar can be used as a hand tool.

Features:

• Fibreglass reinforced nylon


• 19mm hex socket cut out can be used as a hand tool


• Bright Orange - high visibility


• Hook designed to suit Safety Spring


• Light weight

How to use a Ground Dog Screw in Peg™ with Hook Collar:

• Unwind wing nut to open mouth of gripper


• Position the Gripper on either side of the awning material


• Tighten wing nut on top to secure gripper in place


• From underneath thread bungee cord through the hole on the Gripper


• Pull bungee cord over the top of the awning arm


• Secure bungee cord on hook
  
  

Step by step instructions for Ground Dog Screw in Pegs™ with a Hook Collar

1. Wind hook collar onto the Ground Dog Screw in Peg™
   


2. Drill the Ground Dog Screw in Peg™ into the ground using a 19mm socket, and a left thread setting


3. Hook the safety spring around the hook collar


4. Now tighten the high viz tie down straps


5. If the ground is hard, drill the Ground Dog Screw in Peg™ as far as possible, and then wind the wing collar down to the ground level to hold the peg securely


6. You can predrill a hole in the ground with a drill bit if preferred

Hook

The Hook Collar has been designed with a hook that holds the safety spring firmly.

Hex Head

Ground Dog Screw in Pegs™ have a 19mm hex head

Hook Collar 19mm built in socket

Hook Collars have a built in 19mm socket which fits the Ground Dog Screw in Peg™ hex head, this can be used as a hand tool when you have no drill or hand crank.

This function is particularly useful for campers using Ground Dog Screw in Pegs™.

Adjustable Locking Nut

The Hook Collar is an adjustable locking nut that can be varied to suit the depth of the ground. This means if you can only get half the peg into the ground, simply winding down the locking nut will make it just as effective, and means you don’t have to have the peg all the way in.

Hook Collar

The Hook Collar is used with a Ground Dog Screw in Peg™, when using the Tie Down Straps and Safety Spring.

19mm Socket and Drill Adaptor

The Ground Dog screw in pegs have a 19mm hex head, which makes screwing in the pegs easy and fast! The 19mm head fits both the Ground Dog Screw in Pegs™, and the stabilizer legs - this means you only need to carry one size drill socket!